Scientific Calculator
This online scientific calculator is shared: everyone on the board uses the same calculator, and each calculation lands on a shared tape for the whole group to see.
Use Scientific Calculator together on your board.
It has the functions you expect: sin, cos and tan with their inverses, natural log and log, pi, e, parentheses, and a degree mode for angles.
It runs on a shared MockFlow board, so the numbers sit right next to the work you are discussing.
- Scientific functions. Trig functions and their inverses, ln, log, pi, e and parentheses.
- Shared tape. Every calculation is listed on a tape everyone on the board can see.
- One calculator for the group. Everyone works the same calculator, so the whole team sees the same numbers.
- Clear display. The expression and the result are shown together in large type.
How to use Scientific Calculator.
Enter an expression
Tap numbers, operators and parentheses. The display shows the expression above the current result.
Use a function
Tap sin, cos, tan, asin, acos, atan, ln or log, or insert pi or e.
Check the angle mode
The DEG chip on the display shows the angle mode used for trig functions.
Get the result
Press = to calculate. The calculation is added to the Shared tape for everyone.
Fix or clear
Use the backspace key to remove the last entry, C to clear the display, and Clear tape to empty the tape.
Who uses Scientific Calculator.
A team sizing an estimate
Work out numbers together during planning and keep each step on the tape.
A teacher in a math lesson
Show calculations on a board the whole class can see.
Students studying together
Check trig and log answers side by side with their notes.
A workshop reviewing figures
Run quick sums next to the data on the board without switching apps.
Add Scientific Calculator to your board.
Use on a board opens a new board with Scientific Calculator already on it. To add it to a board you already have, follow these steps. Each copy keeps its own data, so a vote on one board never changes another.
Open your board
Open the MockFlow board you want to use it on.
Add it from the Artifact Library
Click Add anything (the plus button) in the toolbar at the bottom of the board, switch to Artifacts and pick Scientific Calculator under Utilities. Adding it does not use AI credits.
Use it together
Click Interact with Component (the hand button), or switch the board to Play mode. Everyone on the board uses the same app, and Reset shared data clears it for the next session.
Brainstorm with MockFlow MCP 
