# Snap to Grid in Wireframe editor

> By default, when you move components in the Wireframe editor, it does not snap-to-grid. However, if you want to snap components...

Source: https://mockflow.com/docs/wireframepro/editor/snap-to-grid-in-wireframe-editor

By default, when you move components in the Wireframe editor, it does not snap-to-grid. However, if you want to snap components by a certain distance when you move them, it can be configured in "Grid Settings" as shown below. Once enabled, the settings are saved with the project.

Configure snap-to-grid settings

1. Open the grid settings by selecting ‘Pages’ or by clicking ‘Project’ from the top menu in the Wireframing editor sidebar.

![Grid Settings (11).gif](https://assets.mockflow.com/docs/media/f9f089625eb892e2537479a0.gif)

1. In the grid settings, enable ‘Snap to Grid’.

![Grid Settings (10).gif](https://assets.mockflow.com/docs/media/70db1d7968cfad65cf9d17cb.gif)

1. Enter the desired snap position value, which determines the spacing for component movement.

![Grid Settings (9).gif](https://assets.mockflow.com/docs/media/d55cdf670d6ddca18c913b00.gif)

1. Components will now move based on the specified snap position, ensuring consistent alignment and spacing.

![Grid Settings (12).gif](https://assets.mockflow.com/docs/media/be8bdca8d02cd882349b188d.gif)